Will SLiPLO fit on my car?

Sliplo is a universal kit which means one size fits all. It’s a modular system which can be combined and trimmed to fit almost any flat surface area. It is very important for you to check under neath your bumper making sure that there is at least 1.5″ of flat surface area where each SLiPLO piece can be adhered to.

Do I need to drill holes?

SLiPLO is a universal, drill free solution product which comes with an adhesive backing that’s as strong as a rivet.

What's included in every DIY kit?

Every DIY kit includes (x8) pieces of SLiPLO skid plates, (x 2) 3M adhesive promoter sponge packs and (x1) installation instructions.

Will it lower my bumpers height clearance?

SLiPLO will decrease your bumper’s lower lip clearance by about a 1/4″. After extensive testing we have found that this is the sweet spot in order for the product to look like a factory add-on while still preventing damage to the front portion of your car’s front lip under extreme conditions such as steep driveways with a high angle of attack. For more information Play Video

Will it create more friction during impact?

SLiPLO will actually reduce the amount of friction during impact. SLiPLO will reduce your overall surface impact area by more then 50% resulting in less abrasion. The special blend of Polyurethane used to construct each piece of Sliplo comes with excellent abrasion resistance properties. It slides like ice skates when it comes in contact with surfaces such as asphalt. Most front spoilers are made of carbon fiber, fiberglass composites, or plastics which have a high friction point during impact. Sliplo eases and cushions the point of impact by allowing your bumper to glide over the surface area.

How strong is the adhesive?

The adhesive on Sliplo has the same strength level as a rivet per square inch and would only fail on three occasions: Sliplo was not properly installed Sliplo was placed on a surface that is not paint (eg. wraps, clear bra ppf, wax, sealants etc.) In very extreme points of impact where an object such as a raised parking block grabs the front portion of Sliplo and causes failure. This is actually a huge benefit of using adhesive over a rivet since it allow for failure under extreme conditions without ripping your bumper off.

https://www.youtube.com/watch?v=YhhspypUUU8

SLiPLO ULTRA Universal Bumper Scrape Guard DIY Kit (Upgraded Version) - SLIPLO

SLiPLO ULTRA Universal Bumper Scrape Guard DIY Kit | Stealthy Protection for Low-Riding Cars

Name: SLiPLO ULTRA Universal Bumper Scrape Guard DIY Kit | Stealthy Protection for Low-Riding Cars
Brand: SLIPLO
SKU: SL-2011-01-FBA-V5
Price: 74.95 USD
Availability: InStock
Rating: 4.64

$ 79.95 $ 74.95

Shipping calculated at checkout.

Protect your car’s front bumper from scrapes and impacts with the SLiPLO ULTRA DIY 8 Piece Kit. Designed for low-clearance vehicles, this discreet guard shields the underside of your bumper, preserving its appearance without compromising your car’s sleek lines.

Key Features:

Underside Protection: Targets the most vulnerable area of your bumper, preventing scrapes and paint damage.
Universal Fit: Adapts to most bumpers with at least 1 inch of flat surface, ideal for lowered or factory-height cars.
Durable Material: Made from snowplow-grade polyurethane for maximum impact resistance.
Easy Installation: Includes pre-cut pieces and 3M adhesive for a quick, DIY-friendly setup.

Why Choose SLiPLO ULTRA?

Discreet Design: Blends seamlessly with your car’s aesthetics.
Car-Specific: Tailored for cars with aggressive stances or aftermarket lips.
Peace of Mind: Conquer driveways and speed bumps without fear of damage.

Drive low, worry less—order your SLiPLO ULTRA DIY Kit today!

Amazing!

Unbeatable product. Lots of knock offs but I’d never buy anything other than the original. Virtually indestructible.

Be Ready to be DISSAPOINTED! PAY MORE for LESS!!

I have used the 'original' Sliplo Scrape Guards on multiple cars, so after my stock of them I bought back in 2020 finally ran out, it was time to reorder in 2025. Guess what, you get a WHOLE LOT LESS now for more money. It used to cost $59 for a full box, now it cost $75, BUT the worse part isnt the price increase, I could live with that, its that the 'new scrape guards' are HALF the thickness of the original, and small length and width, AND you get less of them in each box. Needless to say, they have lost my business permanently, their GREED and inferior product (from the original design) makes them no longer 'worth it' to me.

SLiPLO ULTRA Universal Bumper Scrape Guard DIY Kit | Stealthy Protection for Low-Riding Cars

Easy to install. Tough protection.

Recommended for low cars, whether you have carbon fiber lip or not. Installed on my VW Gti easily, one pack of eight covered the whole lip. I wish there were more primer packs included, mine were basically dry straight out of their packaging. Pro tips: Squeeze the SlipLo strips multiple times while installing, the harder you squeeze the better the adhesion. Also, hit the whole install with a heat gun for a few minutes (until the SlipLo is warm to the touch) to fully activate the adhesive.

Don't buy alternatives

I purchased Sliplo before and it worked out great. On my 2nd car, I decided to go a cheaper version, an alternative brand that is a copy of Sliplo and it was a disaster. Threw it away as it was junk. Re-ordered Sliplo knowing you pay for what you get. Sliplo is worth it.

1 2 3

SLiPLO ULTRA Universal Bumper Scrape Guard DIY Kit | Stealthy Protection for Low-Riding Cars

Customer Reviews